Multi-point locks

General and specifications

  • The multi-point lock is provided with top and bottom lock so that your doors are more secure against forced entry.
    - with hook bolt and 2 security pins
    - with hook bolt and 1 security pin
    - with standard dead bolts
  • The dead bolts are pivoting, rather than sliding. They are therefore longer than conventional bolts, so there is the same proportion of the dead bolt within the lock case as is engaged into the frame, making it extremely difficult for burglars to force entry by means of a crowbar.
  • The lock with hook bolts ensure security in horizontal direction, the pins in vertical direction. The upward hook bolts also serve as anti-lift security.
  • The tapered top and bottom dead bolts pull the vent section against the frame when locking the door, to provide an effective weather seal. Also a slightly deformed door (for example due to extreme weather conditions) can be closed without having to force the key.
  • Two holes above and below the handle opening allow the door handles to be screwed to each other through the lock, so there are no screws visible from the outside. In addition to a more pleasing look and increased security a much stronger fastening of the door handles is obtained.
  • The lock can be used left hand and right hand simply by turning the latch bolt.
  • The latch bolt can be operated by the door handle as well as by the key.
  • Locking and unlocking by a single turn of 360° with the cylinder key.
  • Small turn moment when operating the latch bolt and when locking and unlocking the dead bolts.
  • Almost all locks are SKG certified and have 2 or 3 stars regarding high security.
  • The lock is entirely made of non-corroding materials:
    - faceplate: stainless steel AISI 304 (austenitic) or AISI 430 (ferritic)
    - lockcases: zinc alloy
    - latch bolt: zinc alloy nickel plated
    - dead bolts: zinc alloy nickel plated
    - pins: stainless steel AISI 303 (austenitic)

 

Versions

  • The latch bolt is available in 5 different versions:
    - standard latch bolt
    - long latch bolt
    - narrow latch bolt
    - roller
    - no latch bolt
  • Dimensions:
    - lockcase width = only 15.5 mm
    - length: standard 2170 mm, 1895 mm (short), 2470 mm (long)
    - backset: 30 mm, 35 mm, 40 mm
    - distance doorhandle - cylinder: 92 mm
    - faceplate:
    - Flat faceplate: 16 mm, 20 mm and 24 mm
    - U-shaped faceplate: 22x6.5 mm, 24x5 mm and 24x6.5 mm