Door handles

Door handle with spring

• Handle with spring, rotates 360° in four steps of 90°.
• Due to the aluminium cover the fixing screws are always concealed, for the internal as well as for the external door handle.
• It is also possible to use this handle range for sliding doors in combination with Penta-Lock.
• Finish: polyester powder coated in more than 450 RAL colours.
• The square spindle (8mm) steel zinc plated must be ordered separately.
• Versions:
  - short or long backplate
  - standard grip or as rolling shutter handle
  - fixed grip or fixed knob
  - long backplate with or without cylinder opening
  - internal or external installation: the external handle is fixed to the internal handle through the lock
• The door handles with long backplate are fixed by 3 screws.

Door handles without spring

• The door handles are available in the following versions:
  - with design grip, rounded grip, straight grip, knob, T-grip or as rolling shutter handle
  - fixed grip or fixed knob
  - with visible or with concealed fixing holes (external)
  - with or without cylinder cylinder opening
  - short or long backplate
• Finish: polyester powder coated in more than 450 RAL colours.
• The square spindle (8mm) steel zinc plated must be ordered separately.
• For safety reasons, the external door handle should have invisible fixing so that they can not  be demounted.
• The door handles with long backplate are fixed by 3 screws. In case there's a handle on both sides of the door, they can be fixed to each other through the lock.